Introduction: Fpv Battery Holder for Clothing
This is a simple velcro clip on battery holder for fpv goggles. I ran into problems holding the battery and this worked great solving that problem.
Step 1: Collecting Materials
You will need one velcro strip (about 2 inches long) that is the opposite kind of the one on your battery. You will need 1 to 2 safety pins and a hot glue gun.
Step 2: Putting It All Together
Add a strip of glue vertically across the velcro strip and place your safety pin onto it. Repeat this step on the other side and make sure you don't glue the safety pin together.
Step 3: Your Done!!!
Put your battery on and bask in its glory!