Introduction: Hands-Free Sanitizer Device
No need to tie up those hands or touch the same sanitizer bottle that thousands before you have touched. Now you can make your hands-free sanitizer station.
Step 1: Gather Material and Tools
You will need:
- 54" of 1/2" pvc- I120 pipe
- 2 elbows
- 4 cross - sections
- 4 "T" - sections
- 4 caps
- 8' of 1/2 15mm cpvc pipe
- 1 "T" - sections
- 1 cap
- 4 elbows
- hand sanitizer
- pvc glue
- bolts or screws
- pipe cutter
- foam board
- electrical box
- pliers
- drill
- patterns and instructions from our website. www.junkdrawerideas.com
Step 2: Go to Website for Free Patterns and Instructions
Step 3: Print Instructions
This directions not only give you the instructions that you will need but they will also give you the "to scale" sizes that the parts need to be cut to....
Step 4: Cut Pipe
Use the simple "to scale" instructions to cut your pipe to the correct size.
Step 5: Cut Foot Pedal
Using the patterns you can get the exact size of the foot pedal that you will need.
Step 6: Cut Out Foot Pedal
Pretty simple step!
Step 7: Paint Foot Pedal Black
Step 8: Glue Pipes
Step 9: Add "E" Box
The electrical box will hold the hand sanitizer bottle.
Step 10: Add Spacer to the "E" Box
Step 11: Glue Foot Pedal to Pipe With Brackets
Step 12: Paint Machine
Step 13: Use Machine...wash Hands!
Step 14: Check Out Our Other Builds
https://www.youtube.com/channel/UCdGqRX05swycUSsrNylCjhA?view_as=subscriber