I made a Wallet case out of leather.
Leather material gives it a more luxurious feel.

Step 1: Prepare the Template

Prepare the template that is larger than the actual size of a card.

Step 2: Apply the Oil

Apply the oil to the back side of the leather.
Make sure you apply a heavy coat of oil.

Step 3: Needed to Complete Project

These are all the materials you will need to complete the project.

Step 4: Polish the Leather Edge

Apply oil to the leather edge and polish it with the stick of the wood.

Step 5: Draw a Line to Show the Sewing Line

At this time, draw a line about 0.1 inch away the sewing line from the edge.

Step 6: Draw the Seam Line for the Wallet and Pierce It With a Hammer

At this time, draw a line on the wallet to make the sewing line.
Pierce it with a hammer on the sewing line.

Step 7: Sew It

Sew it with the wax cord.

Step 8: The Inside Pockets Are Attached

There is an inside pocket on the right and left side.

Step 9: Oh My God!

Hi, everyone...
I failed....I was not able to finish that I made a wallet.
Because holes were out of position, a needle was not able to go through holes.
It was difficult to pierce it exactly.
I reflect upon that, and use it for next time!!
I will reuse these materials and I will make something.
I am sorry not to be completed!
Thank you for watching!!

Please subscribe!!
http://www.youtube.com/user/continentaloverseas

Introduction: How to Make a Wallet.... But....