Introduction: "Canidapus" Action Figure

About: I'm handling most of the shipping here at Instructables, as well as learning to run the new 3D printers. Feel free to PM me if you have any concerns about receiving something in the mail.

This figure is one in a series of action figures featuring the faces of the Instructables staff. Using the technique detailed in this Instructable, we created a 3D model of canida's face. I then used Meshmixer to attach her face to the body of an octopus I found on a free-to-use model website. This figure was printed on an Objet Connex 500.

I would have uploaded the STL, but the file is too large to host on Instructables. You can find the STL here if you'd like to print your own, edit, or look at the model.

You can find the other action figures in the series here:

Ewilhelm - https://www.instructables.com/id/E-Killhelm-Action-Figure/

ShadyLogic - https://www.instructables.com/id/Coba-the-Fist-Action-Figure/

Kazmataz - https://www.instructables.com/id/Kazmattack-Action-Figure/

Mikeasaurus - https://www.instructables.com/id/Tankasaurus-Action-Figure/

Lamedust - https://www.instructables.com/id/MaimDust-Action-Figure/

Make It Real Challenge

Participated in the
Make It Real Challenge