Introduction: 3d Printed Speaker Project
This is just a cool project I did to design some speakers from scratch and design them so they match my custom Macbook!
I used the internals from some old Logtiech speakers lying around. Keep reading to learn more!
I used the internals from some old Logtiech speakers lying around. Keep reading to learn more!
Step 1: Research
Before I started, I did a little background research into the sorts of speakers out at the moment, and found that nothing was quite suitable for what I wanted!
Step 2: Sketching Away
From here, I wanted to explore lots of different shapes and forms. I used my Wacom tablet PC to sketch up some ideas I'd seen before and a few of my own, before I settled on my final design.
Step 3: CAD and 3D Printing
Now comes the fun part. I modelled up my design in Solidworks, and sent it to my slicing program to turn into code that my 3d printer would make. Here I also pulled apart the old speakers and got them ready to secure inside my shell.
Step 4: Paint, Prime and Finish
Once I'd printed out all of the parts, I secured my electric internals and layered my 3d printing job with body filler and spray putty to ensure a smooth, even finish.
After some sanding, priming and painting, I was all done!
After some sanding, priming and painting, I was all done!