Introduction: AK-47 - Avtomat Kalashnikova 1947, Knex
Avtomat Kalashnikova Rifle Model 1947
Otherwise known as the infamous,
AK-47
Hi everyone, Barrax here, with a little message about a mate of mine called MotaBoi.
This is just an ad for him, and I'd greatly like it if you could subscribe to him.
Here's his page - he's got some great guns coming up, including an M4, that started off as a collaboration between me and him. However we drifted our own ways, and we are now going to post them at the same time.
So, heres his page: >>> https://www.instructables.com/member/MotaBoi/ <<
Updates:
1.0 - Base Gun with no updates and no accessories
About my gun:
Credits to The Dunkis' for the (most excellent) magazine.
Based off of the Ak-47 in Call of Duty 4: Modern Warfare
Pieces Warning: This build may take up a lot of your pieces. It includes a large count of Y connector "Black Hands" Not as many as the ACR, but still a few. Also, this will require 8 half orange connectors and it *might* break a Y connector in the trigger - *might*.
If you can, please take time building this.
I will look forward to seeing your comments.
And last but not least, please comment, rate, comment again, then subscribe :)
Next gun: M4 Carbine. after that, either Desert Eag;e .50AE or Spas12
Otherwise known as the infamous,
AK-47
Hi everyone, Barrax here, with a little message about a mate of mine called MotaBoi.
This is just an ad for him, and I'd greatly like it if you could subscribe to him.
Here's his page - he's got some great guns coming up, including an M4, that started off as a collaboration between me and him. However we drifted our own ways, and we are now going to post them at the same time.
So, heres his page: >>> https://www.instructables.com/member/MotaBoi/ <<
Updates:
1.0 - Base Gun with no updates and no accessories
About my gun:
Credits to The Dunkis' for the (most excellent) magazine.
Based off of the Ak-47 in Call of Duty 4: Modern Warfare
Stats:
Model: AK-47
Mechanism: FPM over stock
Range: 30-60 depending
Magazine: Dunkis’ STANAG
Pros:
Great looks
Better range than some of my others
Cons:
Complex stock
Broken Y connector L
Pieces Warning: This build may take up a lot of your pieces. It includes a large count of Y connector "Black Hands" Not as many as the ACR, but still a few. Also, this will require 8 half orange connectors and it *might* break a Y connector in the trigger - *might*.
If you can, please take time building this.
I will look forward to seeing your comments.
And last but not least, please comment, rate, comment again, then subscribe :)
Next gun: M4 Carbine. after that, either Desert Eag;e .50AE or Spas12
Step 1: Barrel
Barrel
1 the barrel (and the mag lol) - make
2 make
3 make closeups
1 the barrel (and the mag lol) - make
2 make
3 make closeups
Step 2: Trigger, Handle and Back Mag Wall Assembly
Trigger
1 make
2 make
3 make
Pieces...
4 make
5 make (read note)
6 make
7 make
8 make (from another angle)
Handle
9 handle start making
10 make lol notice the grey connecor on one side... put a white rod on yours if you dont want to put the grey on...
Mag well
11 make
12 assemble
Assembly
13 add
14 add sure you put the grey con on the right side.
15 add resting on the white conn
16 add
17 add
18 add, make sure you get the y con the right way round (if yours is broken).
1 make
2 make
3 make
Pieces...
4 make
5 make (read note)
6 make
7 make
8 make (from another angle)
Handle
9 handle start making
10 make lol notice the grey connecor on one side... put a white rod on yours if you dont want to put the grey on...
Mag well
11 make
12 assemble
Assembly
13 add
14 add sure you put the grey con on the right side.
15 add resting on the white conn
16 add
17 add
18 add, make sure you get the y con the right way round (if yours is broken).
Step 3: The Dunkis' Magazine
1-5 make
Having trouble?
Right click this and open in new tab/window:
https://www.instructables.com/id/Remington-ACR-Adaptive-Combat-Rifle-Knex/step2/The-Dunkis-Magazine/
Having trouble?
Right click this and open in new tab/window:
https://www.instructables.com/id/Remington-ACR-Adaptive-Combat-Rifle-Knex/step2/The-Dunkis-Magazine/
Step 4: Inner Body + Back Sights
1-4 make, not hard
Step 5: Body Side Panels
1-2 make the side panels
Step 6: Assembly, So Far
1 connect
2 slot this on, but dont take the barrel out
3-7 follow pics
8 what you should have with the mag in
2 slot this on, but dont take the barrel out
3-7 follow pics
8 what you should have with the mag in
Step 7: Adding to the Body
just follow the pics...
nothing too confusing, apart from pics 3-7 are the same part...
nothing too confusing, apart from pics 3-7 are the same part...
Step 8: Grip
just make it...
blaa
1 is what you should end up with
blaa
1 is what you should end up with
Step 9: Fore Barrel
make
Step 10: Firing Pin and Assembly
Pin
make
also, get either a bigger elastic, or 2 #64s tied together
dont forget tape
Assembly
3-7 are for the complicated trigger bands
make
also, get either a bigger elastic, or 2 #64s tied together
dont forget tape
Assembly
3-7 are for the complicated trigger bands
Step 11: *** Stock ***
This stock is extremely difficult to put together.
You may feel better making your own XD
Nevertheless, if you think you are good enough to make mine, here you go:
Dont let that put you off BTW, its not too hard.
just follow the pics through, slowly...
zoom in if you need help with the rubberbands..
You may feel better making your own XD
Nevertheless, if you think you are good enough to make mine, here you go:
Dont let that put you off BTW, its not too hard.
just follow the pics through, slowly...
zoom in if you need help with the rubberbands..
Step 12: Done
Have fun with the AK.
If you're having trouble making it... i'll try and put in some more description, but i dont have it made at the moment...
This will be released at the same time as my M4 Carbine. Please visit that as well, if you haven't already.
lol
have a good time fellow iblesers... Can't wait to see you in the next one :)
Note the M4 has been updated since this picture was last taken
And last but not least, please comment, rate, comment again, then subscribe :)
If you're having trouble making it... i'll try and put in some more description, but i dont have it made at the moment...
This will be released at the same time as my M4 Carbine. Please visit that as well, if you haven't already.
lol
have a good time fellow iblesers... Can't wait to see you in the next one :)
Note the M4 has been updated since this picture was last taken
And last but not least, please comment, rate, comment again, then subscribe :)