Introduction: BAT Box
I modeled this Box using a 3dsoftware, and printed with a 3dprinter "dagoma discovery 200"
Step 1: 3D Modeling
I modeled this box in two parts nestable, then, exported in stl format
Step 2: 3d Print
Printed with dagoma discovery 200
BOX(not need support for printing,must be filled)
x:61.51mm
y:61.36mm
z:31.33mm
Top: (Printed with support)
x:74.55mm
y:90.12mm
z:102.04mm
Step 3: Paint
Acrylic paint and varnish.
Step 4: LINK
FREE STL:
https://moon-station.mechamoon.com/index.php/produit/343/