Introduction: Batman: Arkham City Riddler Cane
This was a very fun project, it took a lot of time, but I think it's worth it.
Materials (I used)
~34"+ of 1" wodden dowel rod
~75" of 3/8" by 1.5" wood boards
~wood glue
~drill with a 1" drill bit
~hand saw
~spray paint (gray primer, gold, and a darker green)
~masking tape
~sandpaper
Materials (I used)
~34"+ of 1" wodden dowel rod
~75" of 3/8" by 1.5" wood boards
~wood glue
~drill with a 1" drill bit
~hand saw
~spray paint (gray primer, gold, and a darker green)
~masking tape
~sandpaper
Step 1: The Question Mark
This was the first thing i built.
Everywhere i glued, i let it sit for a day or two to let it dry.
Everywhere i glued, i let it sit for a day or two to let it dry.
Step 2: The Handle/Rod
The rod is a little more than 30"
Step 3: Bottom Block Thing
The last block is like the gold one in step 1, just green.
In the game the Riddler has more on the bottom, but i didn't have the parts to finish, so i just did this.
In the game the Riddler has more on the bottom, but i didn't have the parts to finish, so i just did this.
Step 4: Paint
I primered it all first, then went through with masking tape and added lines like on the question mark part and the handle on the rod... i hope you liked this... it's my first "Instructable"