Introduction: Braided Bracelet
This project is one of the most tedious and frustrating things so you'll need a lot of patience.
Step 1: Materials
Leather
Razor/scissors (razor works better)
Leather lace
Ruler
Pen
leather hole puncher
hammer
patience!
Razor/scissors (razor works better)
Leather lace
Ruler
Pen
leather hole puncher
hammer
patience!
Step 2: Cutting
With the razor blade cut a piece of leather to the length that fits you as a regular bracelet. Mark it and cut it into three sections.
Step 3: Hole Punching
take the hole puncher and hammer and knock two holes into the leather.
Step 4: Braiding
this is the hard part.
Begin braiding the three strips then fold the top into the middle-left gap.
Then fold the top over once more and pull on the two ends. Sometimes it's there but you don't know so you have to look for it.
Begin braiding the three strips then fold the top into the middle-left gap.
Then fold the top over once more and pull on the two ends. Sometimes it's there but you don't know so you have to look for it.
Step 5: Last Step!
Take the lace and weave it through the holes