Introduction: Call of Duty: Black Ops - Perk a Cola - Original

By


Perk-a-Cola! I would like to point out that my labels are files ripped from Call of Duty: Black Ops several years ago. They may have changed since then, but . These are the picutre files from the actual game. End of discussion. These are the flavors I came up with back in the day.The Base for each flavor is:

  • 1.5 cups Seltzer Water

Deadshot Daiquiri

  • 3 Tbs Cherry Torani Flavor
  • 2.5 Tbs Lime Torani Flavor
  • 2 Drop Black Food Color
  • 1 Drop Red Food Color
  • 1 Drop Blue Food Color
  • 2 Drops Dark Green Food Color

Speed Cola

  • 6 Tbs Lime Torani (Smart and Final/Amazon)
  • 1-2 tsp Lemon Juice
  • 1-2 tsp Lime Juice
  • 2 Tbs Sugar
  • 1 Tbs Corn Syrup
  • 2 Drop Light Green Food Coloring
  • 3 Drops Dark Green Food Coloring

Quick Revive Cola

  • 6 Tbs Blue Raspberry Flavoring (Literally from a flavoring jug of I found at Smart and Final)
  • 1 Tbs Vanilla Torani (Smart and Final/Amazon)
  • 2 Tbs Sugar
  • 1 Tbs Corn Syrup
  • 1 Drop Light Blue Food Coloring

Juggernog

  • 3-4 Tbs. Raspberry Torani (Smart and Final/Amazon)
  • 1 tsp Lemon or Lime Juice (Cut the sweetness)
  • 1 Tbs Corn Syrup
  • 1 Tbs Sugar

Double Tap

  • 2 ½ Tbs Mandarin Orange Torani(Smart and Final/Amazon)
  • 1-2 Tbs French Vanilla Torani (Smart and Final/Amazon)
  • 5 Drops Yellow Color
  • 1 Drop Pink Color

Stamin-Up

  • 4 Tbs Lemon Torani (Smart and Final/Amazon)
  • 1 Lemon Toxic Waste (Candy: look at a vintage candy store or on Amazon)
  • Sugar and Corn Syrup to Taste
  • 2 Tbs Lemon Juice
  • 1 Tbs Lime Juice
  • Assumed 3:1 Ratio of Yellow:Red Food Coloring

PhD Flopper

  • 4-5 Tbs Grape Syrup (Literally from another "flavoring" jug of I found at Smart and Final)
  • 1-2 tsp Lemon Juice
  • Sugar + Corn Syrup to Tase

Step 1: Equipment and Ingredients

Because this is food, most of the ingredients are replaceable. Replaceable/optional ingredients are marked with a *. What You'll Need:
Club Soda* (any nonflavored carbonated beverage)
A Twist Off Bottle Of Soda (I use Dr. Browns which can be found at BevMo)
A Bowl of Some Sort
Measureing Untensils
Lime and Lemon Juice*
Torani Flavoring Syrup* (Any brand or flavor will work. Using Raspberry)
Karo Syrup* (Corn Syrup)
Food Coloring*
Sugar*
A Funnel*
Sticker Paper*
Dry Ice*
Labels:   https://sites.google.com/site/justyouraveragesite/

Step 2: Measure

Measure out around one cup of your club soda.

Step 3: Add

Add 3 tablespoons of raspberry Torani syrup to your club soda.

Step 4: Stir

Stir

Step 5: Add

Add 1/2 a teaspoon of sugar. This should always be done before adding corn syrup otherwise the two can stick together and be hard to stir.

Step 6: Stir

Stir again.

Step 7: Add

How much corn syrup you add doesn't make a huge difference as long as you don't add over 2 teaspoons. As you can see, I don't measure it because it makes a bigger mess.

Step 8: Stir

Hooray more stirring!

Step 9: Carbonate*

Place a fairly small chunk of dry ice; it should be about the size and thickness of a full mini post-it notepad. This step is totally optional. If you're trying to go for that "soda-like" feel then you might want to put in the little bit of extra effort. You might notice that the soda is a differnt color. This is mainly because I don't care for any other flavor to be carbonated. While you're waiting, it's time to prepare the bottle.

Step 10: Prepare the Bottle

Removeing the label from your bottle can prove to be a bit more challenging than it seems. Dr. Brown's soda has a label that is very easy to remove which is why I strongly recommend it. If your label has all around adhesive, let it soak in some warm water then try to peel/pick it off. If that doesn't work you can use any type of anti-adhesive spray (just keep it away from the mouth of the bottle.) Make sure to throughly wash off the bottle after using anti-adhesive to keep it from having a dirty/foggy apperance.

Step 11: Labeling Your Bottle

A link to the bottle labels can be found at the link next to "Labels" in the ingredients page and also here https://sites.google.com/site/justyouraveragesite/ . Click the link, click the image, enlarge it once, and copy the image. Paste it on your desktop, open it, and print it. Carefully cut out the labels. If your using Dr. Brown's soda, then there will be a line of adhesive left. Peel off the back of the sticker and paste it over the smudge. Cut out one of the smaller cap stickers with some extra space around it, peel off the back, and place it on the cap.

And to reitterate, these are the EXACT file pictures from the game.  These are the correct labels. :D

Step 12: Pour and Finish

Pour your soda into the bottle and twist the cap back on. Now your done! You can make your own flavors with the basic principle I have supplied you with.