Introduction: DIY Electric Shocker
This instructable is about how to make electric shocker with high-voltage booster. I made it inside PVC tube like classic DIY style. This handmade shocker can't make serious harm, but it hurts =)
Easy and cheap to make, this electric shocker can fright off some dogs, and also you can enjoy with teasing yourself, like I do in the video =) Below you can find all components to make electric shocker by yourself.
► Components
✓ Booster 1000 kV http://ali.pub/hia76
✓ Batteries http://ali.pub/hia76
✓ Holder http://ali.pub/hia76
✓ Switch http://ali.pub/hia76
✓ Button http://ali.pub/hia76
✓ Button http://ali.pub/hia76
Also you can watch all process of making this shocker in this video!
Step 1: Drilling Holes
Use cone drill to make holes for button and switch
Step 2: Connecting Wires
Connect batteries to HV module like on the photo
Step 3: Electrodes
Make electrodes from screws. Connect them, fix on the bottle's cap, fill entire space of shocker with hot glue or silicone seal, then fix cap on the body of shocker.
Step 4: Decoration
Use insulation tape to make your shockker look like bee, and add some rope to handle.
Step 5: Putting Batteries
Shove holder inside the cap. Then insert cap inside the tube - shocker's body.
Step 6: Adding Spark Gap
Use thick wire to make some spark gap between electrodes
Step 7: TEASE ME, BABY!
Oh yeah, it hurts! You can watch the video, I tease myself few times =)
Good Luck!