Introduction: DIY - How to Use the Arduino Uno to Send an Email, SMS and Make a Voice Call

By MEGATRONICS

Wondering how to send emails via your Arduino Uno? Don't worry .... This tutorial video will enlighten you on the step by step process to send emails, SMS messages as well as make voice call using the 3G/GPRS shield by libelium Communication.

Enjoy Guyz!!!!!!!

Step 1: Components Needed for This Project

1. Arduino Uno; https://www.sparkfun.com/products/11021

2. 3G/GPRS shield form Cooking Hacks; https://www.cooking-hacks.com/documentation/tutori...

3. Passive Infrared (PIR) Sensor; https://www.adafruit.com/product/189

4. RGB led; http://www.aliexpress.com/item/3-Color-RGB-LED-Mod...

5 Piezoelectric Buzzer; https://www.adafruit.com/product/160

Also you will need to sign up for the SMTP server using the link below.

https://www.smtp2go.com/

Step 2: Breadboard View and Circuit Diagram

Attached are the Breadboard view and the Circuit diagram of the Project.

Step 3: Arduino Code Used

Attached is the Arduino Code used to operate this project.

Attachments

Step 4: Video of the Project

This is the link for the Video on YOUTube;

Step 5: Pictures of the Project

Hope you enjoy this Project.

Thanks for your attention.