Hi Friends! Today we are going to make our Rc Boat! I will tell all steps to you. I hope you will like it!

Let's Start!

Please Share My Projects With Your Friends.:)

Follow me and vote my projects for more enjoyable projects!

My Other Instructables Projects..:)

Have Fun!.:)

Step 1: What Will We Need?

We will need to;

2 Plastic Bottles
2 Arduino
2 nrf24l01
1 Joystick
2 Battery
2 Breadboard(a big and a little)
Waterproof Box
2 Motors
1 L298n Motor Driver

Step 2: What Do We Want?

When we move the joystick to right, right motor works inside, left motor works outside and it will turn right easily.
It will work with two motors and will be fast.
When we leave from joystick, motors will stop.

Step 3: Paste the Parts With Hot Silicon;

You should use hot silicon for paste them each other.
We will paste bottles stick to the corners of the box.
Close the covers of bottles.
I used cantilevered motors, you should paste them stronger.

Step 4: Arduino Connections;

For Boat;

nrf24l01 to Arduino

• GND 1 ---- GND

• VCC 2 ---- 3.3V

• CE 3 ---- 7

• CSN 4 ---- 8

• SCK 5 ---- 13

• MOSI 6 ---- 11

• MISO 7 ---- 12

• IRQ 8 ---- not connected

L298N Motor Driver To Arduino

• IN1 ---- 5 -- Motor1Left

• IN2 ---- 6 -- Motor1Left

• IN3 ---- 9 -- Motor2Right

• IN4 ---- 10 -- Motor2 Right

(Place in order)

Warning: Connect Gnd s each other (motor driver and arduino) !

For Controller;

nrf24l01 to Arduino

• GND 1 ---- GND

• VCC 2 ---- 3.3V

• CE 3 ---- 7

• CSN 4 ---- 8

• SCK 5 ---- 13

• MOSI 6 ---- 11

• MISO 7 ---- 12

• IRQ 8 ---- not connected

Joystick To Arduino

Gnd to Gnd

5v to 5v

vrY to A1

vrX to A0

Step 5: Coding;

You can get the codes from this link;

>>> Arduino Codes <<<

Step 6: YouTube Video;

Sorry for small pool..:) It will be better in wide water areas..

Subscribe my YouTube Channel for more useful projects.

>>> My Youtube Channel! <<<

I expect your comments. If you have a problem, you can share on comments. I am checking everyday!

Thank You Dear Friends..:)