Folding Knex Knife I Made.(Credit to Dutchwarlord)

Hey, this is my folding knife.
Please rate it, and let me know if there are some things i need to change.
Thanks and please subscribe.=]

Step 1: Piece Count.

Here is a list with a piece count.
There is also a piece count with a photo of all the parts.

Rods:

Green=14.
White=17.
Blue=0
Yellow=0
Red=1
Grey=1

Connectors:

Grey(1 slot)=25
Grey(2 slots)=1
Red=5
Green=0
Yellow=12
Orange=1
White=0

Other:

Tan clip=16
Blue clip=7
bBue ring=12
Y-connector=10
Ball sockets:8
(If you dont got ball sockets, you can remove 8 Y-connectors and just build it without them.)

Step 2: The Blade.

Step 3: The Handle.

Step 4: Connecting.

This is a step that shows you how to connect it.
I think that wouldnt be too hard.=]

Step 5: Finishing It Up.

This is not really needed, but it looks better and its more comfortable for your hand.

Step 6: Done!Have Fun!

Maybe make some more or use it as a bayonet.
If you want it to be a bayonet, then change the two red connectors at the end of the handle to yellows.
You also need to change a blue on the blade by a grey connector.