In this tutorial My partner and I will show you how to put together a PC. The basic components are listed below.

Supplies

Motherboard

GPU

CPU

Heatsink

HDD

Power Supply

Step 1: Step 1: CPU

Plug in the CPU. Look for the cut out triangle on the CPU socket and match the golden triangle on the CPU to the cut out triangle on the socket and it should slide right in with no force required.

Step 2: Step 2: Heat Sink and Thermal Paste

Apply some thermal paste that's about the size of a grain of rice. Put the heat sink on the brackets and on top of the CPU and check that it's thoroughly secured

Step 3: Step 3: RAM

Find the ram slots on your motherboard, match the notches so that the ram goes in, apply light pressure until you hear/see the notches on the side click into place.

Step 4: Step 4: Standoffs

Screw in the standoffs to the case, Line up the holes on the motherboard with the standoff connectors on the case, screw in the standoff screws.

Step 5: Step 5: GPU

Find the PCIex16 expansion slot and plug the GPU into the PCIex16 socket and secure it to the case with the screw to the mount.

Step 6: Storage (HDD/SSD)

Put the Storage device into the slot/bay and put the connector on twist the lock to assure that it's properly secured. Plug the SATA cables into the storage device and into the SATA ports. Find the SATA Power cable on the power supply and plug that into the storage device. (all of the SATA cables are keyed in the shape of an L)