Introduction: How to Maintain Your Zippo
More by the author:
About: Not much to say, I can be pretty helpful if you have any questions about zippos.
This will teach you how to change your flint, wick, and refill your zippo.
Step 1: 1.Changing the Wick
Some people ( including me ) have made the mistake of changing the wick much before it is necessary, because the zippo does not light. You only change the wick when it will not absorb fluid anymore.
1. take the rayon balls out of your zippo.
2. Thread the wick through the hole shown below. ( make sure the wick is not above the chimney )
3. Weave the wick around the rayon as you put it back in, to let it absorb more fuel.
1. take the rayon balls out of your zippo.
2. Thread the wick through the hole shown below. ( make sure the wick is not above the chimney )
3. Weave the wick around the rayon as you put it back in, to let it absorb more fuel.
Step 2: 2.Filling the Zippo
Never do this before you change the wick,Take the insert, lift the felt pad, the pour the fluid inside of the insert.
Step 3: 3.Changing the Flint
1. Unscrew the flint spring/flint screw
2. Put flint in tube
3. Put spring back.
2. Put flint in tube
3. Put spring back.
Step 4: 8.It Lights!
You now have a working zippo.