Introduction: Knex Pistol
I know my camera stinks so don't blame me...Anyway my gun shoots 30 feet.
Step 1: Pieces
connectors: 1 black ball joint Misc.:
11 green 1 white 5 blue spacers
15 orange Rods: 3 Grey spacers
3 Grey 3 green 5 rubber bands
3 hubcaps 3 yellow
1 red 3 black
1 brown/yellow 1 white/Grey
3 black ball joint 4 blue
11 green 1 white 5 blue spacers
15 orange Rods: 3 Grey spacers
3 Grey 3 green 5 rubber bands
3 hubcaps 3 yellow
1 red 3 black
1 brown/yellow 1 white/Grey
3 black ball joint 4 blue
Step 2: The Barrel
Barrel.
Step 3: Firing Pin
This is the firing pin
Step 4: Trigger
The trigger is well connected and this picture was bad...
Step 5: Handle
This is the handle.
Step 6: Assemble & the Rubber Bands
Assemble and add the rubber bands.
Step 7: Done!
Now your done, just pull back the firing pin and drop a white rod in the barrel and fire.