Introduction: K'nex Car With Steering and Interior

By
About: Hello I am Devin, A.K.A Jingo69. I am a student, lover of cars, K'nex/Lego, and art. I mostly post K'nex car creations but plan to post other ideas in future too! …

This is my first thing on this site so please dont be harsh if it needs improvements , good luck if you try to make this and I am looking forward to any mods that you might think of.
Here are some positives and negatives on this car
positives:12
it has steering,
a interior,
opening bonnet
with a support with
fake a v8 engine,
spoiler,
opening doors
small boot with spare tire
back suspension(not very good becuase its quite heavy
,it looks quite good if you build(its not a very good

angle in pic) , 4 exausts
and a choice of witch front to build

negatives 2

Not very good back suspension
Low height from ground (recommend to use bigger tires)

the stats

features ****' 4.5
the looks *** 3 I was never happy with the looks
durability ***' 3.5
over all **** 4

Step 1: The Front of the Car

how to make the front and choosing witch one to build

Step 2: The Steering and the Rest of the Front

try to follow the pics as best as you can
pic 1and 2=make
pic 3 = attach like this
pic 4 = make this
pic 5 = the whole steering made
pic 5 = how to add it to the front
pic 6 = make this
pic 7 = how everything so far should be like
pic 8 and 9 make the bonnet and 2 doors

also some credit to imperer for the steering he made for front wheels.i changed it  a bit to make it steer both ways but his steering did help me  so thanks to him.

Step 3: The Intirior and Middle of the Car

pic 1 = how to attach everything from the previos step
pic 2 = (sorry about the pic being blurry) make the fake engine
pic 3 = the whole thing so far
pic 4 and 5 = make this
pic 6 and 7 = how the steering should be attached from inside
pic 8 and 10 = make pic 9 showing you what you've done so far
pic 11 is showing you how to attach the seats
pic 12 and 13 = making the middle and the roof
pic 14 and 15 showing what you've done altogether on this step

Step 4: The Back of the Car and Attaching the Wheels

this might be the hardest step to make so pay close attension to the back mods and sorry about any confusion
pic 1 = making the wheel arch and middle
pic 2 = where to attach it to
pic 3 and 4 how it should look onthe side
pic 5 making part of the back and where the spare tire is
pic 6 how it should look so far
pic 7,8 and 9 build
pic 10 ,11and 12  how  the back should look like
pic 13 is how to modify the back, please pay close attention to every detail
pic 14,15,16 and 17 shows how many spacers to use and how to attach the wheels

Step 5: Well Done You Have Finished!!!