Introduction: Knex Red Dot Sight
This is my Knex red dot sight (more like orange dot) and like most knex sights, attaches to most guns in one way or another.
Piece Count:
1x knex tyre
2x yellow rod
2x white/grey rod
3x yellow connectors
2x orange/brown connector
1x funny orange dot thing
Pic 1: The sight
Pic 2: Looking down the red (orange) dot sight
Pic 3: A typical Red Dot sight
Pic 4: Attached to Kinetics Semi Automatic Gun
Thanks for looking at my instructable and please rate!
Step 1: The Easy (and Only) Step
Don't worry, nothing hard, only building it in one step!
Pic 1: Build this
Pic 2: Add the two orange rods (if you want, you can add more of the orange rods as filler)
Pic 3: Add another yellow half moon
Pic 4: Put a tyre between the first two half moon pieces
Pic 5: Attach a short grey rod to keep the tyre in place
Pic 6: Place a grey rod with the funny orange piece and arrange it like so
Pic 7: Voila! a nice little red (orange) dot sight!
Pic 1: Build this
Pic 2: Add the two orange rods (if you want, you can add more of the orange rods as filler)
Pic 3: Add another yellow half moon
Pic 4: Put a tyre between the first two half moon pieces
Pic 5: Attach a short grey rod to keep the tyre in place
Pic 6: Place a grey rod with the funny orange piece and arrange it like so
Pic 7: Voila! a nice little red (orange) dot sight!
Step 2: More Images
Yeh, this is only more images, will add to it when i have built anouther couple of guns
Pic 1: A crossbow (not my design) Link: http://www.youtube.com/watch?v=lyot28D3BNo
Pic 2: The sight (same gun)