Introduction: Low Cost Tool Cupboard - Repurposed Particleboard/chipboard Pallets. Cheap & Cheerfull Woodwork Project. Armoire a Outils
More by the author:
About: I am an escapee from modern life, now living by the sea in a forest garden in France. After over 20 years industrial experience, I quit my managerial position to study for a degree in Engineering. That done I …
Repurposing low end chipboard/particleboard pallets to make a handy tool cupboard for use in a well-ventilated workshop. Not materials I usually work with but 4 turned up recently at my suppliers and I had just the job to fit them. Also included, how to repurpose a set of door hinges to make a staple and padlock fitting, normally an expensive item to buy. I use a power tool for this becauseI wanted to photograph the sparks but you can make this with a hacksaw!!! This project cost me approximately 2 Euros/dollars/pounds, almost everything in it was repurposed.
Public Domain Music: : http://archive.org/details/Nimba
Public Domain Music: : http://archive.org/details/Nimba