Introduction: Origami Usability Testing
I'm going to teach you how to create an origami paper crane step by step! Enjoy!
Supplies
paper
scissors
Step 1: Step 1
Begin with a piece of printer paper
Step 2: Step 2
Take the top right corner and fold it along the edge of the left side
Step 3: Step 3
Cut the excess piece of paper that is not folded with scissors
Step 4: Step 4
Open the folded piece of paper
Step 5: Step 5
Fold the paper along the crease that was created
Step 6: Step 6
Open the folded piece of paper to where it looks like a diamond
Step 7: Step 7
Fold the right corner of the diamond to the opposite corner
Step 8: Step 8
Unfold the paper to where it looks like a square
Step 9: Step 9
Flip the paper over
Step 10: Step 10
Fold the top right and bottom right corner to the top left and bottom left corner
Step 11: Step 11
Unfold again
Step 12: Step 12
Fold the top right and top left corners to top bottom right and bottom left corners
Step 13: Step 13
Unfold again where it looks like a diamond
Step 14: Step 14
Fold along the bottom left and right creases
Step 15: Step 15
Bring top down to create crease
Step 16: Step 16
Keep flaps on the bottom
Step 17: Step 17
Fold right side flap to center crease
Step 18: Step 18
Fold left side flap to center crease
Step 19: Step 19
Repeat steps 17-18 on the other side
Step 20: Step 20
Fold top flop down
Step 21: Step 21
Take bottom flap and crease it on the top crease you just created
Step 22: Step 22
Fold two inside creases inward
Step 23: Step 23
Crease bottom
Step 24: Step 24
Flip paper over and repeat steps 20-23
Step 25: Step 25
Take the right corner and the left corner and fold them to the center
Step 26: Step 26
Flip the paper and repeat step 25
Step 27: Step 27
Pinch both sets of flaps together
Step 28: Step 28
Take bottom corner and fold it up to the center crease
Step 29: Step 29
Flip and repeat step 28
Step 30: Step 30
Flip bottom part up
Step 31: Step 31
Fold left and right flaps down
Step 32: Step 32
Fold front flap down to make head