Introduction: Paper Mauser C96

By

Step 1:

Get a piece of 8x10 paper ( printing paper and roll it up and tape it.

Step 2:

The trace out a Mauser c96 body ( shown)

Step 3:

Then put another piece of paper behind it and cut.

Step 4:

Cut out two or more strips of paper and put Aron sides and join the two together.(leave gap at bottom of aware and front)

Step 5:

Then put barrel in and tape then cut the barrel if too long

Step 6:

Cut two little 1/4 inch part of the excess barrel. And tape on sides

Step 7:

Then maze a rectangular prism to fit snug in the bottom