Introduction: Purple Light Painter - Draw Light in the Air - in One Minute

By AeroArduino
About: DIY my way through life. For me, Instructales is a way of living. It's my making log. My life is counted with the instructables I make. Visit my website and If you need more Arduino Mentoring for your class yo…

I love Air Paint . You can make an easy Purple Air Paint in only One Minute !!

If you like this instructable, Please vote for me.

First , collect the components.

1 Blue LED ,Amazon DE , eBay
1 Red LED ,Amazon DE , eBay.

1 200 ohm Resistor ,Amazon DE

1 9 Volt Battery ,Amazon DE

1 Push Button ,Amazon DE

4 Jaw Connectors ,Amazon DE


Connection:

Connect the circuit as shown in diagram. The Positive Pin of the LED is the Taller One.

Hold the circuit by your both hands.

Here is my Channel on Youtube:

AeroArduino

Step 1: Setup & Start Painting

You need a Bulb Mode camera or software. I used Slow Shutter on my iPod.

Settings of the program are shown here.

Start Painting by pressing and releasing the Push Button with your friend holding the camera and shooting your AirPainting.

Happy Painting.

You can also find my book Learn By Making on Amazon website.

If you like this instructable you can support us by many ways:
-------------------------------------------------------------------

1. Leave comments stating your point of view about this article.

2. Buy our book on Amazon Learn By Making.

Thank you for visiting our instructable.