Introduction: Quick Skills #9: How to Tie the Poacher's Knot
Hi Instructables Community,
this week it is time for a new knot project. This one is very simple to tie and if you are a subscriber or read some of my other Instructables you might have seen it being used as part of the double fisherman's knot. This knot can be used as a relatively secure way to create a simple snare.
Users of the mobile app can use this link to get to the video!
Knot Info
ABoK Reference: | #1239, #409 |
Alternative names: | Strangle Snare, Double Overhand Noose |
Main Purpose: | Historically this knot was used by poachers to snare birds and other small game. In a survival situation you could use this simple knot for the same purpose. Other than that you could use it as a hitch to attach a rope to a carabiner (not to secure yourself though) |
Strengths: | Simple and quickly to tie. |
Weaknesses: | Might jam under load and become difficult to untie |
Remarks: | Source: Animated Knots by Grog The Poacher's Knot is one of the few knots suitable for use with new ropes such as Dyneema and Spectra. Bowlines and other familiar loop knots may not be secure with these slippery high modulus ropes and may pull undone, e.g., at loads as low as 15 - 20% of the rope's breaking strain. |
Cheers Alex
Step 1: Bight
- Take your rope and form a bight with the working end.
- In this example the working end is above the standing end
Step 2: First Wrap
- Take the working end and loosely wrap it around the bight as shown in the pictures.
- Ensure your working end is long enough for this step if not you can still adjust it at this stage.
Step 3: Second Wrap
- Wrap the working end around the bight a second time.
- Again make sure you have sufficient working end left over for the remaining steps
- At this stage the two wraps are very loose as you can see in the picture when tying it regularly you would hold the standing end and the wraps in your left hand and work with your right.
Step 4: Thread Through
- Thread the working end through both turns
- Start to tighten the knot holding the working end whilst pulling on the loop.
Step 5: Pull Tight
- Pull the knot tight from the working end.
- Pulling on the standing end or loop will make the noose smaller
- To make the loop wider hold the knot and pull the standing end through it.
- If you left enough working end you might also add a stopper knot for added security.
Step 6: Views & Variants
- You can test the knot as shown in the picture. If you done it right the noose should tighten properly and even shaking won't open it.
- The second and third pictures are top and bottom views.
- The fourth picture shows a variant with an additional wrap which is known as the Triple Overhand Noose.
Step 7: Giveaway
You can win one of three Let's Prep "Tinder" Skill Builder Kits including a 3-Month Instructables Pro Account.
The kit shown is the current work in progress of the Skill Builder kit which includes a number of natural and synthetic materials. The whole concept is still very much in development and I will publish Instructables & videos accordingly once I know where I really want to go with this.
All you have to do is to subscribe to my YouTube channel and leave me a comment at this video and include "I want to go out and learn something new!" & your Instructables username. You have until the 15th May 2016 1800 GMT to participate after which I will announce the winners on my FB, Twitter & Blog. (Only entries from the EU, Norway, Switzerland, USA & Canada are eligible to get the full package mailed (please understand that I pay for this myself), residents of other countries may only receive the Pro-Account).