Ray_Gun_Zoombierush_gear

This project was follow Ruiz Brother's Ray Gun Blaster tutorial

I just want to have fun and learn how to use adafruit soundboard through this project

Supplies

Parts

You'll need the following parts to build this project.

• Audio FX SoundBoard
• Pro Trinket 5V/3V
• PAM8302 Mono 2.5W Class D Audio Amplifier 
• Pro Trinket LiIon/LiPoly Backpack Add-On
• NeoPixel Ring 12 x 
• Laser Diode
• 500mAh Lithium Ion Polymer Battery
• Mini Metal Speaker
• 6mm Slim Tactile Switch Buttons
• Slide Switch

Tools & Supplies

The following tools and supplies were used in the development of this project.

• 3D Printer
• Filament
• Soldering Iron
• Solder
• Panavise Jr / Helping Third Hand
• Wire Strippers
• Flush Diagonal Cutters
• Flat Pliers
• #4-40 3/8in Phillips machine screws and nuts
• Adhesives (E6000, superglue, etc.)

Step 1: 3D Print File and Soldering

By following the tutorial you can easily do soldering and get all your 3D prints down

Step 2: Connect Your Board

By checking my circuit, soldering seems ok. However, I'm having problems connecting to my board

Highly suggested Ruiz Brother's Ray Gun Blaster tutorial

It cover pretty much every details you should be aware of