Introduction: Slate Bank
wooden beach
Step 1: Step 1
cut 4 of the 2×4 down to 14 1/2 inchs . And the 1×4 down 18 inchs. Keep 7 2×4 at 72 inchs.
Step 2: Step 2
Take a 72 inch 2×4 and 2 of the 14 1/2 inch. Put them on the floor. Then put 2 of the 1×4 on each end. Use wood glue. To glue them together. And use 2inch wood screws. Your stuff should start to look like my pictures.
Step 3: Step 3
When done. It should look like mine. Now i haven't sand or varnish yet. But, that is my next step.