Introduction: Slide Action Pistol V.2 (full Kit)

Main body
5 Grey connectors
2 red connectors
4 orange connectors
2 Grey corner connectors
13 Yellow connectors
4 white connectors

2 orange flex rods
3 blue flex rods (cut)
13 white rods
35 green connectors
8 black extenders

Slide
2 short blue connectors
5 red connectors
1 green connector
4 orange connectors
8 yellow connectors

17 green rods
6 white rods
2 rubber bands

Barrel extension

4 Grey connectors
2 orange connectors
3 red connectors
6 yellow connectors

10 green rods
3 white rods

Slide release

1(v.1 v 2)2 (v.3) 2 part Grey connectors
1(v 1)2(v.2)4(v.3) orange connectors
1(v.3) Grey connectors
2 blue rings(v.3)optional
2 rod caps(v.3)optional

1(v.1 v.3)2(v.2) blue rods
2(v.2 v.3)white rods


Standard mag

1 ,2 part Grey connectors
3 orange connectors
1 green connectors
1 orange joiner(optional)

1 green rod
3 white rod
1 orange flex rod

Extended mag

1 ,2 part Grey connectors
2 Grey connectors
4 red connectors
3 orange connectors
4 yellow connectors

9 green rods
4 white rods
1 orange flex rod
1 rubber band

Drum mag

3 ,2 part Grey connectors
1 orange connector
1 green connector
14 red connectors
2 blue corner connectors
2 Grey corner connectors
2 black extenders

24 green rods
3 white rods
1 orange flex rod
2 green flex rods



Step 1: Body

Step 2: Slide

Step 3: Slide Release

The v.2 slide release is for of you want to use both left and right hand and the v.3 is for if you do not have any rubber bands left

Step 4: Mags

Step 5: Barrel Extension

Step 6: Putting It Together