Introduction: The FSSG

By
About: The majority of stuff posted here (instructables) is rubbish and as I now have better things to do I will be less active. also as I currently have no camera I cannot post anything. Oh well the majority of p…

Build This Gun It Is Epic.


well I never really intended on posting this but after so many people said they liked it I decided why not?

so here it is in all its glory the FireStorm Shot Gun

some stats:
ammo - grey rod, red rod, 2 yellow rods, 3 blue rods, 5 white rods, oodammo, (with small mod)
Action - slide
trigger - true (duh)
 
the gun I am posting differs slightly from the one in the picture below, but all I did was get rid of the hinges so people without them can build it



Now lets start building!
 

Parts list by https://www.instructables.com/member/PiTBuLL892/

CONNECTORS
dark grey:27
orange:53
light grey:3
red:51
green:19
yellow:38
white:21

3D CONNECTORS
blue:22

RODS
green:102
white:92
blue:16
yellow:5
red:2
grey:3
black:1

MISCELLANIOUS
y con:2
tan clip:3
white connector-sized patch:4
blue spacers:74
bendy green rod:3
female ball joint:3

BROKEN PARTS
orange connector cut in half:2

THIS MAY NOT BE EXACT
 

Step 1: Barrel

this is the most important part of the gun, make sure that when you are building it you put the bullet locks on properly, especially the front one if you intend on firing multiple rounds

Step 2: The Front Half

The barrel connection, the grip and basic frame, it should be easy enough to make from the pictures and notes

Step 3: The Pin and Main Mech

cAnnother easy step Yay! please note you will need to remove the pin when you connect the trigger

Step 4: Stock, Handle and Trigger

Yet annother very easy step, except maybe for the trigger

Step 5: Putting It All Together (yay)

probably the hardest step

Step 6: Rubber Bands

this is how you place the bands on the gun, you can use 64's but I prefer 62's, both placements will be covered here

Step 7: Finished!

Wow you built it in only 6 Steps! well once you have built you can post a picture of yours below and I will add it to this step, (thanks oblivitus for the idea), also leave any feed back here as well.