Introduction: The GGG
The Givadanger Gattling Gun is my first instructable. It Has 16 rounds but there is room for improvement. There is a total of 258 peices in just the clip so make sure you have enough peices. Enjoy!
Step 1: The GGG Clip
This is the part where alot of you will get stuck with not enough peices. I have put all the parts on a list below. Good Luck.
Pic 1: Parts List
Pic 2: Make 2 Of these.
Pic 3: Make 8 Of these.
Pic 4: Another angle of last pic.
Pic 5: Final Product
Pic 1: Parts List
Pic 2: Make 2 Of these.
Pic 3: Make 8 Of these.
Pic 4: Another angle of last pic.
Pic 5: Final Product
Step 2: The GGG Gun
This takes just about 193 peices and is easy to make.
Pic 1: Parts List
Pic 2: Front Of Gun
Pic 3: Another angle of front.
Pic 4: Back Motor Compartment
Pics 5-6: Different Angles of Compartment
Pic 7: Finished Product
Pic 1: Parts List
Pic 2: Front Of Gun
Pic 3: Another angle of front.
Pic 4: Back Motor Compartment
Pics 5-6: Different Angles of Compartment
Pic 7: Finished Product
Step 3: The GGG Firing Bar
This would work better if you put grey spacers all on the green rod to make it move easier.
Pic 1: Firing Bar
Pic 2: Attached to gun
Pic 3: Finished!!
Pic 1: Firing Bar
Pic 2: Attached to gun
Pic 3: Finished!!