Introduction: Tic Tac Toe Made Out of Cardboard Bottle Caps and Chopsticks on Tinkercad

I made a tic tac toe on tinkercad using cardboard, chopsticks and bottle caps here is the link to access the tinkercad https://www.tinkercad.com/things/dIWVHLfFVUV?sharecode=IZMtWniRXwkhSicEuHPFIGrgyHamzLw8Mp_z25oVknI copy and paste the link in your URL to vist the project

Supplies

  • A computer with internet
  • Tinkercad
  • A computer mouse

Step 1:

Create a new design in tinkercad

Then go to the everyday objects tab

After that scroll all the way down and drag the 12x12 cardboard piece onto the canvas

Step 2:

Go to the recyclables tab and scroll all the way down

Then click on the chopsticks and drag them on the canvas

After that you stretch out the chopsticks so they are the length of of the carboard

Step 3:

Right next to the chopsticks are going to be bamboo chopsticks drag them onto the canvas

Then stretch out the bamboo chopsticks to the width of the carboard

Step 4:

Scroll up on the recyclables to the top and drag 4 of the bottle cap into the tic tac to boxes

Then stretch the caps out so they are just big enough to fill up the box

Step 5:

Next you are going to grab two more bamboo chopsticks

Shrink them down so they are small enough to fit in the box on the tic tac toe

Then cross them over each other so they create a x and drag them in to a box on the cardboard

After copy and paste the chopsticks to create 3 more and place them into the boxes in on the tic tac toe board