Introduction: Trophy- Lasercut
This design was developed for competitions but is adaptable for all applications.
This design consists of 3 different trophy models and is fully customizable to your own application.
You'll need:
- a laser cutter
- the material you want to make it from.(We used MDF with a thickness of 9mm)
- Wood glue
Attachments
Step 1:
First check that you have two legs for each trophy
Step 2:
Put a small amount of wood glue on the legg
Step 3:
Slide the leg in place at the bottom of the trophy and repeat this on the other side
Step 4:
Let is rest for one hour to make sure the glue is dry
Step 5:
Make as many as you want and enjoy!