Introduction: WheelchairDecor
Being in a wheelchair myself, I know how intimidating they can be...that is why I came up with these Wheelchair Jackets, and opened my online shop WheelchairDecor. With these handmade jackets, lap blankets, and decorations my wheelchair became a fun friend...adding personality and a unique style! If you are in a wheelchair or know someone who is, these Wheelchair Jackets will bring a lot of fun in a not-so-fun situation!
Following is a tutorial on how to make a Wheelchair Jacket!
Step 1: Step 1
Step 1: Cut your fabric to 18” x 38”
From the selvage, cut four, 7” x 2 1/2” strips.
From the selvage, cut four, 7” x 2 1/2” strips.
Step 2: Step 2-3
Step 2: Fold the strips in half, right sides together, and sew along one end and one long side using a 1/4 inch seam allowance.
Step 3: Clip corners
Step 3: Clip corners
Step 3: Step 4-5
Step 4: Turn strips right side out
Step 5: Iron strips
Step 5: Iron strips
Step 4: Step 6
Step 6: Cut two 6” Velcro strips and two 1” Velcro strips
Step 5: Step 7
Step 7: Attach one side of Velcro strip to each of the four fabric strips
Step 6: Step 8
Step 8: Lay fabric flat. Measure 4” from the bottom of the fabric (not the fold); pin strip in place. Measure 13” inches from the bottom of the fabric (not the fold); pin strip in place.
Step 7: Step 9-10
Step 9: Turn fabric over. Pin 1” Velcro strip exactly opposite the strips on the other side; measuring 1” in from edge. Baste in place.
Step 10: Be sure to match Velcro teeth on strip to fuzz on the other side. Sew in place
Step 10: Be sure to match Velcro teeth on strip to fuzz on the other side. Sew in place
Step 8: Step 11
Step 11: Place front and back of jacket with right sides together.
Step 9: Step 12-13
Step 12: Using a 1/2” seam – sew the front to the back on three sides, leaving the bottom open for turning.
Step 13: Clip corners. Turn right side out.
Step 13: Clip corners. Turn right side out.
Step 10: Step 14
Step 14: Starting at the top, iron the three sewn edges of the jacket.
Step 11: Step 15-16
Step 12: Finished Wheelchair Jacket
This is a full view of the finished jacket...each one is reversible so you get two styles in one item!
Step 13: How It Looks!
This is how a Wheelchair Jacket looks on a wheelchair...a lot more inviting and fun than just a plain wheelchair!