Air Horn Office Chair Prank

The office is a great place to prank your coworkers. Interrupt the white noise of typing keyboards and the hum of the photocopier with a blaring klaxon hidden under someone's office chair.
This is the air horn office chair prank!

Pneumatic pistons under the seat of most office chairs compresses when weight is applied, an air horn is zip-tied to one side of the piston with the other end braced against something solid. I used a cheap ABS plumbing cap fitted around the piston. When the target sits in the chair the nozzle of the air horn is triggered, releasing a loud honk (and hopefully scaring anyone nearby)

Here's what I used to make mine:

• air horn
• 10 large zip-ties
• 2.5" ABS plumbing plug (or other annular object)
• scrap cardboard

The air horn was wrapped in black electrical tape to it would be less visible when installed. Depending on your chair style and air horn size you may have to add in a small shelf on the piston so the bottom of the air horn needs something to compress against. I chose an in expensive ABS plumbing plug, the crown of the plug was removed and a pie-shaped section was removed. This opening will allow the plug to be slipped over the piston, with the pie section replaced and zip-tied in place the air horn will now compress on the cap and activate.

The air horn nozzle is positioned touching the underside of the seat, folded scrap cardboard acts as a spacer between the air horn and the piston. Ensuring the nozzle and air horn body aren't obstructed by chair frame they can be zip-tied in place. With ABS plug zip-tied to piston and air horn positioned all zip-ties are tightened and the leads cut off.

---

Did you prank someone with your version of this project? Share your pictures or video of your air horn office chair prank in the comments below!

Have fun!