Introduction: Backpack Holder for a Bicycle

By

MATERIALS

1-four heavy duty zip-ties

2-container 13 1/4" x 7 1/2" x 10" ( as seen in the photo above)

3-rear bicycle rack

TOOLS

1-two hands

2-snipping pliers (optional)

3-drill

4-caulking (optional )

WHAT TO DO

1-Drill one hole into the bottom of each corner of the the container about 3/4 " long.

2-Align your rear bicycle rack with the container.

3-Pull the zip-ties through the four holes and the rack.

4-Secure the zip-ties.

5-Remove the excess zip-tie using the the snipping pliers.

6-Apply caulking to the end of the zip-tie to keep yourself from getting cut by the sharp edge.