Introduction: Wooden Bench
How to make a wooden bench
Step 1: What You Need
Materials
2x6x5 2x4x9 1x6x5
outdoor wood screws
Power tools:
table saw
sawzall
skill saw
electric screwdriver
clamps (optional)
2x6x5 2x4x9 1x6x5
outdoor wood screws
Power tools:
table saw
sawzall
skill saw
electric screwdriver
clamps (optional)
Step 2: Measure/ Cut Out
back two legs are 22.3" long 3" wide, the angle or curve on the back legs do not matter, just make sure the the hole leg is the same width
front two legs are12" long
middle piece 11.5" long
seat 29.5" long
cut pieces to length with table saw,
front two legs are12" long
middle piece 11.5" long
seat 29.5" long
cut pieces to length with table saw,
Step 3: Assemble
If you have clamps clamp a back leg to one middle piece, then clamp a front leg to the other end of the middle piece. make sure to have the middle piece overlap the front and back leg, enough so you can screw the parts together.
Then do the same procedure with the other legs
Then do the same procedure with the other legs
Step 4: Finished
finally if you want sand it, then put a varnish on it.